Different speaker cable lengths – does it actually matter? Should you be at all interested in home theatre equipment then you will no doubt be aware that there is a huge argument about how exactly long the speaker cables between two or more speakers actually has to be. There’s plenty of misinformation around which has led lots of people to think that the length of the Cayin A100t needs to be kept identical, or at least almost identical, to avoid time delays and phase problems.
Do a quick search for any audio-visual forum or website and you will find that probably the most common questions is approximately variations in speaker cable lengths. It’s time to settle this problem, so this article aims to tell you why people think that they have to keep the length of their speaker cables identical, and possibly most importantly, why the idea that cables need to be exactly the same length is really a total myth.
Plenty of this boils down to the manufacturers who sell exotic speaker cables. Promoting the notion that all runs of cable have to be exactly the same length helps the makers to create a false sense of expertise in your eyes consumers, all things considered, the company that creates the cable is unquestionably going to understand what they are referring to, and when they are saying that cable lengths should be identical then surely it should be true, right? Of course, it also helps the producer to sell more cable because consumers will happily buy more cable compared to what they absolutely need.
Similar to most myths about technology, once a few people have already been told that this Hi-Fi Speaker Cable needs to be the same length it soon becomes widespread and you will see people preaching this idea through the entire audio-visual community.
Let’s have this cleared up for good: differences in the size of your speaker cables doesn’t matter one bit. There is absolutely no reasons why the runs of cable involving the speakers must be kept to identical lengths. So just why do so many people debate that there exists? Well it’s simply right down to misinformation and misunderstanding.
The main argument to keep speaker cable runs exactly the same length is it really helps to avoid any delays or phase problems which would otherwise occur. Now, there is certainly actually some truth behind the notion that cable length can cause delays – obviously it takes slightly longer for any signal to travel along a cable that is a few hundred feet long compared with a cable that is just 2 or 3 feet long.
On the face of this you could be inclined to accept the argument that each speaker within your body ought to be fed with a cable this is the same length, that way you can be certain that your speakers receive the signal at precisely the qzuqtl time and you will definitely therefore avoid any delays or phase issues.
The issue with this particular argument though is the fact that typical home theatre installations are on this type of small scale that different lengths of speaker cable make absolutely no impact whatsoever! To ensure this to get relevant we would need to be dealing with cables that were over 500 feet in size, as well as then your variations in signal delay would still be unnoticeable to most people. That being the situation, there exists virtually no problem with using speaker cables of different lengths.
So next time someone tries to let you know that you ought to maintain your runs of cable the same length feel free to ignore them! In reality in most cases it’s usually preferable to keep Line Magnetic LM-210IA as short as possible, which certainly causes it to be less expensive since you are only buying the volume of cable which you actually need. Just be sure you maintain the cable for enough time to travel around furniture, or round the fringe of the room if required.